Amplifier Pallets
These are fully assembled high power FM broadcast amplifiers. Mounted on a aluminum plate, they are ready to be attached to an appropriately sized heat sink. Pallets are supplied with a connector and mounting kit which includes either UHF or N connector (your choice, please specify), stainless steel 6-32 allen cap screws, teflon coaxial cable, and heatsink compound. If ordered with a pallet, the heat sink will be drilled and tapped for the specific pallet. For heat sinks and power supplies, see below.
175 Watt Amplifier Pallet- $ 215
175 Watt Amplifier Pallet $215.00Designed for FM radio transmitters, this amplifier incorporates broadband matching and a SD2941-10 MOSFET transistor.
- 86 – 110MHz
- 48 Volts
- Input/output 50 ohms
- Pout: 170W minimum
- 16dB Gain (175W)
- Class B
- Broadband coax transformer
- 4.5 watts of input drive for maximum output power.
- Requires 48 to 50Vdc @ to 6.0 amps
- -14dB input return loss or better.
350 Watt Amplifier Pallet- $ 335
350 Watt Amplifier Pallet $335.00Designed for FM radio transmitters, this amplifier incorporates microstrip technology and an SD2942 MOSFET transistor to enhance ruggedness and reliability.
- 86-110MHz
- 48 Volts
- SD2942 MOSFET
- Input/Output 50 ohms
- Pout 350W min. w/4 watt input.
- 400W peak power
- 18 dB gain minimum.
- Low distortion Class B push-pull.
- Temperature compensated bias
- Compact size; LxWxH 4.0 x 2.0 x 1.5 inches
600 Watt Amplifier - $ 665
Designed for FM radio transmitters, This amplifier incorporates microstrip technology and a pair of 300W BLF278 transistors.
- 86-110MHz 48 Volts
- Input/Output 50 ohms
- Pout 600W with a 6.5 watt input.
- 700W+ peak power.
- 19dB gain minimum.
- Low distortion Class B push-pull.
- Small size: only 5 in x 9.0 in
- 68% efficiency typical.
- Power requirements 19 to 21 ADC 650W out at 48V.
Power Supplies for Pallet Amplifiers
175 Watt - $250
350 Watt - $ 400
600 Watt - $ 800
Heat Sinks for Pallet Amplifiers
175 Watt - $ 75
350 Watt - $ 100
600 Watt - $ 150